EcoCrete76TM System


Mix the EcoCrete76 liquid, water and cement to use the hydraulic cement minerals to penetrate deeply in to the application surface for waterproofing coating. This strong bond is ideal for application in areas with frequent contact with water.

Characteristics

Installation

  • Excellent adhesiveness on humid surfaces.
  • Excellent ventilation / permeability.
  • Ideal primer for multiple surfaces.
  • Excellent durability. Can withstand acid rain for a considerably long time.
  • Does not crack or bubble to damage waterproofing system.
  • Excellent solar radiation blocking characteristics, and low VOC classifies it as eco-friendly.
  • CLEANING OF SURFACE
  • Use wire-brush, or grinding, to clean surface of any pollutants, Use pressure washer to wash down the surface
  • MIXING OF ECOCRETE 76 SLURRY
  • Ratio of EcoCrete76 : Water : Cement (1 : 1 : 3)
  • In an empty 18.9 liter container, add 4kg of EcoCrete76, 4kg of water and mix. After mixing, add 10kg of Cement and mix until no solids are left in a mixer
  • LOWER LAYER WATERPROOFING, ECORCRETE76 APPLICATION, APPLICATION OF Ecorooffabric, MID LAYER WATERPROOFING, APPLICATION OF ECOCRETE76
  • use brush or roller to apply 1 or 2 layers
  • (1.0kg/m2- drying time 2 ~ 4 hours)
  • Before drying, while still moist, apply the EcoRooffabric
  • (A minimum of 10cm should overlap)
  • stretch out EcoRooffabric and apply the 2nd layer of the mid-waterproofing
  • (1.2kg/m2 - drying time 2~3 hours).
    Check if Ecorooffabric is well adhered.
  • APPLICATION OF UPPER LAYER OF ECOCRETE76
    • Use brush or roller to apply EcoCrete76 (1.0kg/m2).
    • Check if EcoCrete76 is perfectly applied.
   

Application Area

 
  • Roofs of buildings, warehouses, parking lots, gas station floors.
  • Basement walls, metro, tunnels, sewerage systems.
  • swimming pools, reservoirs, water tanks.
  • Concrete roads, Concrete barricades.
  • Rooftop landscaping waterproof, ponds, retaining walls.